Our highest-sodium, highest-alumina grade. A strong flux for tile bodies.
- Al₂O₃
- 18.64%
- SiO₂
- 66.85%
- K₂O
- 0.33%
- Fe₂O₃
- 0.89%
- TiO₂
- 0.60%
- LOI
- 1.26%
We supply three analysed grades of sodium feldspar as run-of-mine lumps of 0–50 cm. Below are the full laboratory results.
Our highest-sodium, highest-alumina grade. A strong flux for tile bodies.
A balanced sodium feldspar with low iron and a moderate silica content.
A siliceous grade with the lowest iron and titanium of the three.
Analysed by XRF. All values are in weight %.
| Code | SiO₂ | Al₂O₃ | Na₂O | K₂O | Fe₂O₃ | TiO₂ | CaO | MgO | BaO | MnO | P₂O₅ | SO₃ | Cr₂O₃ | Cu | Pb | Zn | LOI |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DL | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.05 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| 05 | 66.85 | 18.64 | 10.04 | 0.33 | 0.89 | 0.60 | 0.71 | 0.63 | 0.01 | 0.01 | 0.01 | <0.05 | 0.02 | <0.01 | <0.01 | <0.01 | 1.26 |
| 03 | 76.25 | 14.41 | 7.04 | 0.81 | 0.53 | 0.06 | 0.15 | 0.23 | 0.01 | <0.01 | <0.01 | <0.05 | <0.01 | <0.01 | <0.01 | <0.01 | 0.48 |
| 04 | 79.21 | 12.54 | 6.57 | 0.34 | 0.49 | 0.05 | 0.21 | 0.13 | 0.01 | <0.01 | <0.01 | <0.05 | <0.01 | <0.01 | <0.01 | <0.01 | 0.45 |
DL = detection limit. “<” means the value is below the detection limit. These are typical values from one laboratory report. We can send a fresh analysis with each offer.
Na₂O is the main flux in sodium feldspar. Alumina adds strength, and low Fe₂O₃ and TiO₂ keep the fired body light in colour.
Run-of-mine lumps, sized 0–50 cm.
Our feldspar is supplied for ceramic and porcelain tile bodies.
Lab samples are free for buyers in Iran. Export buyers can contact us about samples.
Our sodium feldspar (soda feldspar) is supplied as a flux for ceramic floor and wall tiles and for porcelain tile bodies. In the kiln it melts, binds the body together and lowers water absorption, which is why it makes up a large share of porcelain tile recipes.
Grade 05, with the highest Na₂O and Al₂O₃, suits dense porcelain bodies that need strong fluxing.
Grades 03 and 04, with the lowest iron and titanium, suit bodies where a light fired colour matters.
The price depends on the grade, the quantity and the delivery term. See how the price is set.
The minimum export order is 2,000 tonnes. Regular buyers can schedule repeat shipments.
Laboratory samples are free for buyers in Iran. Export buyers can contact us about samples and an up-to-date analysis.
Sodium feldspar is supplied as run-of-mine lumps of 0–50 cm, ready for crushing and milling at the tile plant.
EXW at the mine in Sirjan, FOB Shahid Rajaee or Khamir port, or DAP to your named destination.
Grade 05 has the highest Na₂O and Al₂O₃ for strong fluxing. Grades 03 and 04 have the lowest iron and titanium for light-coloured bodies.
Yes. Every price offer comes with an up-to-date chemical analysis of the grade offered.
Send us your target chemistry and we will recommend a grade.