What is sodium feldspar? Uses and how it differs from potassium feldspar

Sodium feldspar, also called soda feldspar, Na-feldspar or albite, is one of the most important raw materials of the ceramic industry. This article explains what it is, how it differs from potassium feldspar, where it is used and what makes a good sodium feldspar.

What is feldspar?

Feldspars are the most abundant group of minerals in the Earth’s crust. They are aluminosilicates of sodium, potassium and calcium, and almost every feldspar is a mixture of three end members:

  • Albite (NaAlSi₃O₈): the sodium feldspar.
  • Orthoclase and microcline (KAlSi₃O₈): the potassium feldspars.
  • Anorthite (CaAl₂Si₂O₈): the calcium feldspar.

In industry, the word “feldspar” usually means sodium feldspar, potassium feldspar or a blend of the two.

What is sodium feldspar?

Sodium feldspar is feldspar in which albite is the main mineral. Pure albite contains about 11.8% Na₂O, 19.4% Al₂O₃ and 68.7% SiO₂. Natural deposits always contain some quartz and other minerals, so commercial sodium feldspar grades usually contain less Na₂O than pure albite. Our own grades, for example, contain between 6.57% and 10.04% Na₂O.

Sodium feldspar vs potassium feldspar

Sodium feldsparPotassium feldspar
Main mineralAlbite (NaAlSi₃O₈)Orthoclase / microcline (KAlSi₃O₈)
Alkali in the pure mineralAbout 11.8% Na₂OAbout 16.9% K₂O
MeltingMelts at a lower temperature; the melt is more fluidMelts more gradually; the melt is more viscous
Effect in a ceramic bodyStrong, fast fluxing and good densificationWider firing range and better shape stability
Typical useFloor and wall tiles, porcelain stonewareSanitaryware, tableware and bodies that need a wide firing range

Many plants blend the two types. The right ratio depends on the kiln cycle, the clays used and the product.

Where is sodium feldspar used?

  • Ceramic tiles and porcelain stoneware: the largest use. Sodium feldspar is the main flux that densifies the body and lowers its water absorption.
  • Sanitaryware and tableware: often blended with potassium feldspar.
  • Glass: a source of alumina and alkali; low-iron grades are needed.
  • Glazes and enamels: as a flux and a source of alumina.
  • Fillers: in finely ground form, in paints and plastics.

What makes a good sodium feldspar?

  • Na₂O (+K₂O): the higher the alkali content, the stronger the flux.
  • Low Fe₂O₃ and TiO₂: these colouring oxides darken the fired body.
  • Al₂O₃: a sign of feldspar content; it also adds strength.
  • Low LOI: less gas is released during firing.
  • Consistency: the same chemistry from one shipment to the next.

Our article on how to read a feldspar analysis explains each of these values in detail.

Lumps or powder?

Sodium feldspar is sold as run-of-mine lumps, as crushed material or as milled (micronised) powder. Most tile plants grind their raw materials together in ball mills, so lumps are often the most economical choice for them. More on this in our guide to sodium feldspar prices.

Sodium feldspar from Iran

Iran has substantial feldspar deposits and a large domestic tile industry, and Iranian sodium feldspar is also exported to ceramic producers in the region. Rezaei Mining Group mines sodium feldspar at three active faces near Sirjan, in Kerman province, and supplies three analysed grades as lumps of 0–50 cm.

Frequently asked questions

Is sodium feldspar the same as albite?

Albite (NaAlSi₃O₈) is the sodium end member of the feldspar group and the main mineral in sodium feldspar. Commercial sodium feldspar is mostly albite with some quartz and other minerals, so its Na₂O content is lower than that of pure albite.

What is the difference between sodium and potassium feldspar?

Sodium feldspar melts at a lower temperature and forms a more fluid melt, so it is a strong, fast flux. Potassium feldspar melts more gradually and forms a more viscous melt, which gives a wider firing range and better shape stability.

What is sodium feldspar used for?

Mainly as a flux in ceramic tile and porcelain stoneware bodies. It is also used in sanitaryware, tableware, glass, glazes and enamels, and in finely ground form as a filler.